Back Flush Fuel Oil Purification System For Power Station / Sewage Treatment Plants

Back Flush Fuel Oil Purification System For Power Station / Sewage Treatment Plants

• 1. INTRODUCTION
• The slotted-tube filter elements with filtration rates of 50 to1,000 ∪m ensure highly effective separation of contaminating particles from the process medium.
• Automatic cleaning starts as soon as the elements become contaminated. The filtrate flow is not interrupted during the back-flushing procedure.
• A range of filters of different sizes allows flow rates of up to 10,000 m³ per hour.
• Numerous combinations of materials and equipment as well as individually adjustable control parameters allow optimum adaptation of the filter to any application.

2. APPLICATION

Power stations

To reduce the impurities content and water insider of light fuel oil , diesel oil ,lube oil ,heavy fuel oil etc

• District heat supply
  Protecting heat exchangers from clogging and wear.
• Vessel industry
  Improving and protection of power of the diesel engine generator set by filtering process
• Sewage treatment plants
  During production of industrial water, filtration of a take-off of the clear run can be used to save valuable drinking or well water.
• Environmental technology
  Back-flushing filters are used as pre-filters before waste-water treatment plants (UV treatment, reverse osmosis, membrane filtration...).
• Mining
  By filtering underground, spray water of an even quality is assured. This results in more reliable operation of pumps and disc-cutting machines.

oil filtering systems

oil filtration equipment

Back Flush Fuel Oil Purification System For Power Station / Sewage Treatment Plants Images